Loading ...
Loading ...
Loading ...
en Overview
Use
Starting growing
Notes:
– Do not install in direct sunlight, near to
air conditioning and heating appliances
or outside. If the ambient temperature
is too high (approx. 36-40 °C), the
light unit will light up red. At over
40 °C the appliance will then switch
(e.g. washing machines).
– We recommend planting plants that
together. The growth timelines are
MSGP6 X Image sequence B
MSGP3 X Image sequence C
1. Place the tray on an even surface.
2.
Important: Please follow the dosage
recommendations to ensure optimal plant
growth.
Capacity / nutrient solution
MSGP3
MSGP6
3. Pour the nutrient solution into the bowl.
When doing so, do not exceed the
4. Place the assembled watering unit onto
the tray and put plant capsules in all
empty openings.
Note: If the watering unit is not assembled,
follow steps 14. and 15.
5. Carefully remove the cover from the
plant capsules so that the seeds do not
6. Insert the plug into the pump’s power
connection.
7. Place the light unit onto the connector
unit of the pump without height modules.
Pay attention to the guide slot when
doing so.
Overview
X Fig. A
1 Light unit
a Sensor (MSGP6)
b Button (MSGP3)
2
a Guide slot
3 Pump with connector unit
a
b
c Power connection
d Guide slot
4 Plant tray
a
b Openings for plant capsules
c Filling opening for nutrient solution
5 Watering tray
6 Bowl
a
7 Plug-in power supply unit
8 Measuring spoon
9 Capsule set *
a Plant capsules
b Nutrients
* Not included in the delivery.
Before using for the
Before the new appliance can be used, it
Remove the light unit and watering unit
(watering tray with plant tray and pump).
Remove other accessories from the
water bowl.
examine them for obvious damage.
X Fig. A
The height modules will not be required
until later.
Loading ...
Loading ...
Loading ...