Loading ...
Loading ...
Loading ...
9 | P a g e
INSTALLATION INSTRUCTIONS
Location
The air conditioner should be placed on a hard and level surface strong enough to support its weight.
The unit is equipped with caster wheels for portability. It should only be rolled on smooth, flat surfaces.
Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects.
The air inlet and outlet should be free of any obstructions and be placed with at least 20” of clearance
for efficient air-conditioning and circulation.
Exhaust hose Installation
When using the air conditioner, the hot air from the exhaust hose must be exhausted out of the room to
complete the air exchange of the condenser. The intake hose is optional. When the unit is operating in
dehumidifying or fan-only mode, installation of the exhaust hose is optional.
1. Expand each end of the exhaust and intake hoses about 6”.
2. Install the hose connectors onto the exhaust and intake hoses by turning counterclockwise.
3. Align the tab cut-outs of each of the hose connectors to the tabs on the air exhaust and air intake at
the rear of the unit and snap in place.
If installing the optional air intake hose in an area with poor air quality, we recommend
purchasing the intake hose pre-filter accessory.
Only extend the hose to the necessary length, keeping it as short and as straight as possible.
We do not recommend extending the hose more than 9' long.
If you are interested in purchasing an additional 5’ exhaust hose, please contact
[email protected] for retail sales information or visit whynter.com for a list of optional
accessories.
INTAKE
EXHAUST
Loading ...
Loading ...
Loading ...