Loading ...
Loading ...
Loading ...
5
CONTROL PANEL AND FEATURES
Not all features and cycles are available on all models.
POWER BUTTON
Touch to turn the dryer on and off. Touch to stop/cancel
a cycle at any time.
CYCLE CONTROL KNOB
Use your dryer’s cycle control knob to select available
cycles on your dryer. Turn the knob to select a cycle
for your laundry load. See “Cycle Guide” for detailed
descriptions of cycles.
START/PAUSE BUTTON
Touch and hold to start a cycle, or touch once while a cycle
is in process to pause it.
TIMED DRY ADJUST
Use “+” and “–” with Timed cycles to increase or decrease
the length of a Timed Dry or Rapid Dry cycle.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up
and the Estimated Time Remaining (for Sensor cycles) or
actual time remaining (for Timed cycles) will be displayed.
Touch the setting names next to the display to adjust
settings. See “Cycle Guide” for available settings on each
cycle. Not all settings are available with all cycles.
Temperature
When using Timed cycles, you may select a dry
temperature based on the type of load you are drying.
Use the warmest setting safe for the garments in the
load. Follow garment label instructions.
NOTE: Sensor cycles allow temperature adjustment.
At most, 3 of available temperatures (not including Air
Only) are allowed.
Dry Level
You may adjust the Dry Level on Sensor cycles (except
for the Sanitize cycle), if desired.
NOTE: Dryness level is for use with Sensor cycles only.
Wrinkle Prevent
If you will be unable to remove a load immediately,
touch Wrinkle Prevent to add up to 150 minutes of
periodic tumbling to help reduce wrinkling. On some
cycles, you may select the “With Steam” setting to add
a short steam cycle after 60 minutes to help smooth out
wrinkles.
1
2
3
4
5
OPTIONS
Use to select available options for your dryer. Not all cycles
and options are available on all models.
Static Reduce (on some models)
Touch to add the Static Reduce option to selected
Sensor cycles (see “Cycle Guide”). The dryer will
automatically tumble, pause, and introduce a small
amount of moisture into the load to help reduce static.
This option adds approximately 8 minutes to the total
cycle time.
Damp Dry Signal
Touch to select the Damp Dry Signal to Low, High, or
Off. When selected, a series of beeps will sound when
the load is damp but not completely dry. This will allow
you to take clothes out of the load that do not need to
dry completely. This option is not available on Sanitize,
Steam Refresh, and the Timed Dry cycles.
Audio Level
Touch AUDIO LEVEL to change end beep and button
sounds simultaneously to Low, High, or Off.
CYCLE STATUS LIGHTS
The indicator bar on the right side of the control will let you
know what stage of the drying cycle is in process.
Sensing
The Sensing indicator will light during Sensor
cycles to indicate that the moisture sensor on
the dryer is operating. This indicator will not light
during Timed cycles or options such as Wrinkle
Prevent.
Steam
This indicator will light when a steam function
is active.
NOTE: Steam is not available on all models
or on all cycles.
Done
This will indicate that the selected cycle has
ended and the load may be removed from
the dryer. If Wrinkle Prevent has been selected,
the dryer may continue to tumble the load, even
if the Done indicator is lit.
Check Lint Screen
The Check Lint Screen indicator light will ash as
a reminder to clean the lint screen. It will ash until
the door is opened or a cycle is started. It will turn
off when the dryer is turned off.
6
7
NOTE: The control panel features a sensitive surface that responds to a light touch of your nger. To ensure your selections are
registered, touch the control panel with your ngertip, not your ngernail. When selecting a setting or option, simply touch its name.
3
2
1
5
5
6 7
4
Loading ...
Loading ...
Loading ...