Loading ...
Loading ...
Loading ...
English - 14
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “88:88” and then
“12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24-hour or 12-hour
notation. You must set the clock:
•
When you first install your microwave oven
•
After a power failure
Do not forget to reset the clock when you switch to and from summer and winter
time.
1. Press the Clock button.
2. Press the Up or Down button to set time display type (12H
or 24H). At that time, press the Select button to set the
display type.
3. Press the Up or Down button to set the hour.
4. Press the Select button.
5. Press the Up or Down button to set the minute.
6. When the right time is displayed, press the Select button to
start the clock.
Result: The time is displayed whenever you are not
using the microwave oven.
CHECKING THAT YOUR OVEN IS OPERATING
CORRECTLY
The following simple procedure enables you to check that your oven is working correctly
at all times. If you are in doubt, refer to the section entitled “Troubleshooting” on the
page38.
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum (100 % - 900 W) is
used, the water takes longer to boil.
Open the oven door by pulling the handle on the right side of the door.
Place a glass of water on the turntable. Close the door.
Operate the Microwave mode and set the time to 4 or 5 minutes
by pressing the +30s or Up and Down button the appropriate
number of times.
Result: The oven heats the water for 4 or 5 minutes. The
water should then be boiling.
MC28H5013AW_EU_DE68-04234B-03_EN.indd 14 2017-06-29 10:49:19
Loading ...
Loading ...
Loading ...