Loading ...
Loading ...
Loading ...
YOUR 206 CC IN DETAIL
75
*According to specification
AUTOMATIC SWITCHING ON
OF LIGHTS*
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor. They switch off as soon
as the light becomes bright enough or
the windscreen wipers stop.
Note: In foggy weather the brightness
sensor can detect sufficient light. As a
consequence, the lights will not come
on automatically.
This function is active when the
vehicle is supplied to the customer.
To disarm or activate the function:
- Start with the key in the accessories
position (1st notch),
- Press the end of the stalk for more
than two seconds.
Note: after the ignition is switched off
and depending on the brightness, the
lights remain on for 45 seconds or until
the vehicle is locked.
Comment: The brightness sensor,
coupled with the rain sensor, is loca-
ted in the centre of the windscreen,
behind the interior mirror. It is used
for automatic switching on of the
lights.
Operating check
Activation
Acivation of this function is accompanied
by an audible signal "Automatic ligh-
ting'' on the multifunction display.
Disarming of the function is not accom-
panied by any audible signal
Note: the function is temporarily disar-
med when the driver uses the manual
lighting controls.
If the brightness sensor does not
function correctly, the system acti-
vates the function (the lights come
on). The driver is alerted by an audible
signal, accompanied by the message
"switching on of lights faulty".
Contact a PEUGEOT dealer to have the
system checked.
Loading ...
Loading ...
Loading ...