Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
30
Instrument panel display
After switching on the ignition, three functions are shown in succession:
– service indicator (see corresponding section),
– engine oil level indicator,
– total distance recorder/total and trip distances.
Note: the total and trip distances are displayed for 30 seconds when the ignition
is switched off, on opening the driver's door, as well as on locking and unlocking
the vehicle.
Engine oil level
When the ignition is switched on, the engine oil level is indicated for approximate-
ly 10 seconds, after the servicing information.
Maximum
Check the level using the dipstick to confirm whe-
ther the message is correct; a surplus of oil can
cause damage to the engine.
Contact a PEUGEOT dealer without delay.
Minimum.
Check the level with the dipstick and top it up. The figu-
re shown is only correct if the vehicle has been on
stable, level ground, with the engine stopped, for 10
minutes.
Oil level gauge fault
The 6 segments flash; they indicate a fault in the
oil level gauge.
There is a risk the engine will be damaged.
Contact a PEUGEOT dealer.
Engine oil temperature
indicator light
When the engine is running, it
indicates the oil temperature:
- When the needle is in zone C, the
temperature is correct,
- When the needle is in zone D, the
temperature is too high. To lower
the oil temperature, reduce your
speed.
Loading ...
Loading ...
Loading ...