Loading ...
Loading ...
Loading ...
29
Connecting appliances directly
If the appliance is connected directly to a hood, it cannot
be connected to your home network as well. The
appliance functions in the same way as a cooktop with
no network connection. The cooktop can always be
operated via the control panel.
Connecting appliances via your home network
If the appliances are connected to each other via your
home network, both the hood controls and Home
Connect can be used to operate the cooktop.
Notes
▯ Make sure you follow the safety instructions in the
instruction manual for your hood and that these are
complied with even when operating the appliance via
the hood controls on the cooktop.
▯ If the appliance is being operated by means of the
controls on the hood, this mode of operation always
has priority. It is not possible to use the hood controls
on the cooktop during this time.
▯ In networked standby mode, your appliance requires a
maximum of 2 W.
Setting up a connection
To set up the connection between the cooktop and the
hood, the cooktop must be switched on.
Connecting directly
Make sure that the hood is switched off.
For more information, refer to the section entitled
"Connecting to the cooktop" in the instruction manual for
your hood.
Note: If you connect your cooktop directly to the hood, it
cannot be connected to your home network as well and
you will not be able to use Home Connect.
1.
Turn on the cooktop.
2.
Touch and hold the kitchen timer key for 4 seconds.
The product information is displayed.
3.
Touch the kitchen timer key repeatedly until
™ and ‚‡ are displayed alternately.
‹ lights up in the cooking position display.
4.
Set the value ‚ in the settings area.
‚ flashes in the cooking position display.
5.
You have two minutes to initiate the connection
process on the hood.
6.
Once the cooktop is connected to the hood, the value
„ appears in the cooking position display. After you
exit the settings menu, the symbols for the cooktop-
based hood controls are displayed in the cooktop's
control panel.
Connecting via your home network
A router that has WPS functionality is required.
Access to your router is required. If you do not have this,
follow the steps for "Direct connection".
When you begin, make sure the hood is connected to the
app or is on your home network.
1.
Turn on the cooktop.
2.
Touch and hold the kitchen timer key for 4 seconds.
The product information is displayed.
3.
Touch the kitchen timer key repeatedly until ™ and
‚‡ are displayed alternately.
‹ (not connected) or ƒ (connected to home network)
will be lit on the cooking position display.
4.
Set the value ‚ in the settings area.
‚ flashes in the cooking position display.
5.
If the appliance is not yet connected to your home
network, press the WPS button on the router within the
next 2 minutes.
The cooktop will be connected to your home network
and the value ƒ will appear on the cooking position
display. The process of connecting to the hood starts
automatically and is active for 2minutes.
If the appliance is already connected to your home
network, proceed to the next step.
6.
Initiate the process for connecting to the hood.
7.
Once the cooktop is connected to the hood, the value
„ appears in the cooking position display. After you
exit the settings menu, the symbols for the cooktop-
based hood controls are displayed in the cooktop's
control panel.
Note: Connection can only be established when both
appliances are connected to your home network and the
connection process has been initiated for both of them. If
the connection process has already timed out for one of
the two appliances, try to connect again (basic settings,
™‚‡ setting).
Loading ...
Loading ...
Loading ...