Loading ...
Loading ...
Loading ...
13
USING YOUR OVEN
Before Using Your Oven Electric Ignition
Be sure you understand how to set the controls
properly. Practice removing and replacing the shelves
while the oven is cool. Read the information and tips
on the following pages. Keep this guide handy where
you can refer to it, especially during the first weeks of
using your new range.
Power Outage
CAUTION: Do not make any attempt to operate
the electric ignition oven during an electrical
power failure.
The oven or broiler cannot be lit during a power
failure. Gas will not flow unless the glow bar is hot.
If the oven is in use when a power failure occurs,
the oven burner shuts off and cannot be re-lit until
power is restored. This is because the flow of gas
is automatically stopped and will not resume
when power is restored until the glow bar has
reached operating temperature.
Oven Moisture Fluorescent Night Light (on some models)
As your oven heats up, the temperature change of the
air in the oven may cause water droplets to form on
the door glass. These droplets are harmless and will
evaporate as the oven continues to heat up.
Use the switch on the upper control panel to turn
the light on and off.
Oven Light Automatic Oven Shut Off
Use the switch on the lower control panel to turn the
light on or off.
As a safety feature, this oven will automatically shut
itself off if it has been left on for more than 12 hours.
(continued next page)
Oven Control, Clock and Timer Using Your Oven
OVEN CONTROL, CLOCK AND TIMER
The control has a series of tones that will sound at different times. These
tones may sound while you set the control for an oven function or at the
end of the oven function. They will also alert you when an incorrect time
or temperature has been entered or if there is a problem with the oven.
Tones While Setting the Control Preheat Notification Tone
When you press a touch pad you will hear a beep.
This beep will let you know you have placed enough
pressure on the pad to activate it.
When you set an oven temperature the oven
automatically starts to heat. When the temperature
inside the oven reaches your set temperature a tone will
sound to let you know to place the food in the oven.
Attention Tone
This tone will sound if you set an invalid function or try to set an additional
function. The tone can be quickly identified by watching the display messages.
Loading ...
Loading ...
Loading ...