Loading ...
Loading ...
Loading ...
Playback
E
58
REC
Digital video equipment fitted with this terminal lets you edit, copy and transfer data digitally, with
imperceptible loss in image and sound quality. The DV terminal is for both line-in and line-out, since a
single DV cable can handle data in both directions.
Use a Canon CV-150F DV cable to connect two digital devices together. When you are recording, make
sure you connect the cable to the XL1 before connecting the other end of the cable to the recording device.
When you are recording to the XL1, turn the POWER dial to VCR and press its
2 (REC) and a (pause)
buttons down simultaneously (“DV IN” appears in the display when you press “play” on the playback
device). Then press its pause button to start/pause recording.
Notes:
• If the cables are not connected properly, the camera displays the caution “CHECK THE DV INPUT”.
• The image displayed by the camcorder that is being recorded to (for example on an attached TV, or in its
viewfinder) may become distorted during digital dubbing. The actual recording on the tape, however, is
not affected.
• If you press the
2 (record) button with the DV cable unconnected, the camera displays the caution
“CHECK THE DV INPUT”. An anomalous image may also flash onto the screen.
• Blanks between recordings on the playback tape are recorded as anomalous images on the tape that is
being recorded to.
• When operating either camcorder with the DV cable connected do not turn the power off.
• You must attach both digital devices to a power source for digital dubbing to take place.
DV Dubbing (DV terminal conforming to IEEE1394)
Loading ...
Loading ...
Loading ...