Loading ...
Loading ...
Loading ...
Recording
E
38
In normal recording conditions, the camera sets the audio recording level automatically as long as you slide
the REC LEVEL switch to A (automatic).
You can also set the recording level manually:
1. Set the recording level for stereo 1 in exactly the same way as for two channel recording.
2. Set the recording level for stereo 2 by sliding the REC LEVEL switch of the AUDIO 2
controls to M (manual).
3. Turn the L and R dials to independently adjust the recording levels of the two inputs
(corresponding to the L and R channels of the AUDIO 2 RCA jacks).
• Check the levels for each channel in the audio LCD panel.
• It is essential for you to monitor the sound using headphones.
• Adjust the headphone volume by rotating the PHONES LEVEL dial.
Setting the recording level for four channel recording
1. Set the audio mode to “12 bit ST-1, 2”.
2. Set the input for stereo 1 in exactly the same way as for two channel recording.
AUDIO 2 IN••LINE
3. Set the input for stereo 2 by connecting a device to the AUDIO 2 RCA jacks and then
selecting the appropriate option forAUDIO 2 IN:
- LINE: To record sound from a VCR, CD or other line in devices.
- MIC ATT20: To record sound using a microphone, when the sound level is high.
- MIC: To record sound using a microphone (e.g. attached via the optional MA-100 Microphone
Adapter/Shoulder Pad ).
(see p. 18)
Setting the Audio Input — Four Channel Recording
Loading ...
Loading ...
Loading ...