Loading ...
Loading ...
Loading ...
en Troubleshooting
52
Errors Cause Troubleshooting
Excessive formation of foam
occurs.
Hand washing-up liquid is
present in dispenser for rinse
aid.
▶
Immediately add rinse aid to the dis-
penser.
→"Adding rinse aid", Page31
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or appliance care
product used causes excess-
ive foaming.
▶
Change the brand of detergent.
Information on display panel
Errors Cause Troubleshooting
Special salt refill indicator
lights up.
Insufficient special salt.
▶
Add Special salt →Page29.
Sensor does not detect spe-
cial salt tablets.
▶
Do not use special salt tablets.
Refill indicator for special salt
does not light up.
Water softening system is
switched off.
▶
Setting water softening system
→Page29
Refill indicator for rinse aid
lights up.
Insufficient rinse aid. 1. Add Rinse aid →Page31.
2. Set the amount of rinse aid to be dis-
pensed.
Refill indicator for rinse aid
does not light up.
Rinse aid system is switched
off.
▶
→"Setting the amount of rinse aid",
Page31
L or H appears on the digital
display.
Not a fault.
▶
Consult the description for the
TurboSpeed programme.
Display flashes. Appliance door is not closed
properly.
▶
Close the appliance door.
‒ Arrange the tableware so that
no parts project beyond the
basket and prevent the appli-
ance door from closing prop-
erly.
Machine Care indicator lights
up.
Machine care is recommen-
ded.
▶
Run the Machine Care programme
without tableware.
‒ Use a special machine care
product.
The indicator will go out automatically
after 3 wash cycles whether Machine
Care is carried out or not.
Loading ...
Loading ...
Loading ...