Loading ...
Loading ...
Loading ...
Troubleshooting en
51
Errors Cause Troubleshooting
Removable streaks are
present on glasses, glassware
with a metallic appearance
and cutlery.
Detergent residue is present
in the final rinse. Lid of the de-
tergent dispenser is blocked
by tableware items and will
not open fully.
1. Arrange tableware in the top basket
tableware so the tab collecting tray is
not obstructed by tableware.
→"Arranging tableware", Page35
Items of tableware are blocking the
dispenser lid.
2. Do not place tableware or fragrance
dispensers in the tablet collecting
tray.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food
and do not prerinse tableware.
▶
Adjust the sensitivity of the sensors.
Irreversible clouding of glass-
ware.
Glasses are not dishwasher-
proof, only suitable for dish-
washers.
▶
Use dishwasher-proof glasses.
▶
Avoid a lengthy steam phase (stand-
ing time after wash cycle ends).
▶
Use a programme with a lower tem-
perature.
▶
Set the softening system to the water
hardness.
▶
Use detergent with a glass protection
component.
Rust spots on cutlery. Cutlery is not sufficiently rust-
resistant. Knife blades are of-
ten more severely affected.
▶
Use rust-resistant tableware.
Cutlery may also rust if
washed together with rusting
items.
▶
Do not wash rusting items.
Salt content in washing water
is too high.
1. Remove any spilled special salt from
the tub.
2. Screw the cap of the special salt dis-
penser on tight.
Detergent residue is present
in the detergent dispenser or
the tablet collecting tray.
Spray arms were blocked by
tableware so detergent was
not rinsed out.
▶
Check that the spray arms are not
blocked and can rotate freely.
Detergent dispenser was
damp when detergent was ad-
ded.
▶
Only add detergent to a detergent dis-
penser when dry.
Loading ...
Loading ...
Loading ...