Loading ...
Loading ...
Loading ...
TRANSMISSION OIL CHECK
1. Position the vehicle on a level
surface.
2. Remove the fill plug
q
. Check the
oil level.
3. Add the recommended fluid as
needed to bring the level to the
bottom of the fill hole threads
w
.
4. Reinstall the fill plug. Torque to
specification.
TRANSMISSION OIL CHANGE
1. Remove the fill plug.
2. Place a drain pan under the gearcase. Remove the drain plug. Allow the oil
to drain completely.
3. Clean and reinstall the drain plug. Torque to specification.
4. Add the proper amount of the recommended oil.
5. Reinstall the fill plug. Torque to specification.
6. Check for leaks.
7. Dispose of used oil properly.
FRONT GEARCASE (DEMAND DRIVE) FLUID
Always check and change the demand drive fluid at the intervals outlined in the
Periodic Maintenance Chart. Maintain the fluid level at the bottom of the fill hole
threads. See the POLARIS Products section for part numbers.
Change the front gearcase fluid every 25 hours if the 4WDC unit is exposed to
extreme use. Extreme use includes any of the following:
• operation in 4WDC mode for prolonged periods
• constant 4WDC operation on hilly or mountainous terrain
• 4WDC is the primary mode of all-wheel-drive operation
TIP
If the front gearcase is makes excessive noise during 4WDC operation,
change the demand drive fluid. If the noise continues, please see your
POLARIS dealer for service.
106
MAINTENANCE
Loading ...
Loading ...
Loading ...