Loading ...
Loading ...
Loading ...
Refueling
Refueling
Fuel cap
1. To open the fuel filler flap, press on the rear
edge, arrow. The fuel filler flap opens.
2. Turn the fuel cap counterclockwise.
3. Place the fuel cap in the bracket attached to
the fuel filler flap.
Gasoline
For the best fuel efficiency, the gasoline should
be sulfur-free or very low in sulfur content.
Fuels that are marked on the gas pump as con‐
taining metal must not be used.
Wheels and tires
Tire inflation pressure specifications
The tire inflation pressure specifications can be
found in the tire inflation pressure table in the
printed Owner's Manual.
After correcting the tire inflation
pressure
With runflat tires:
Reinitialize the Flat Tire Monitor.
With Tire Pressure Monitor TPM:
The corrected tire inflation pressures are applied
automatically. Make sure that the correct tire set‐
tings have been made.
With tires that cannot be found in the tire pres‐
sure values on the Control Display, reset the Tire
Pressure Monitor TPM.
Checking the tire inflation pressure
Regularly check the tire inflation pressure and
correct it as needed:
▷ At least twice a month.
▷ Before embarking on an extended trip.
Cleaning the wheels
The friction during hard braking may produce
brake dust and make the rims dirty. Brake dust
can be removed by cleaning the rims. BMW rec‐
ommends using vehicle care and cleaning prod‐
ucts from BMW.
Electronic oil measurement
Functional requirements
A current measured value is available after ap‐
prox. 30 minutes of normal driving.
Displaying the engine oil level
Via iDrive:
1.
"CAR"
2. "Vehicle status"
3. "Engine oil level"
Different messages appear on the Control Dis‐
play depending on the engine oil level. Pay atten‐
tion to these messages.
Adding engine oil
General information
Safely park the vehicle and switch off drive-ready
state before adding engine oil.
Seite 32
QUICK REFERENCE
On the road
32
Online Edition for Part no. 01402720992 - II/19
Loading ...
Loading ...
Loading ...