Loading ...
-2
Setting up the Screen
For optimal image quality, position the projector perpendicular to the screen with the
projector's feet fl at and level. Doing so will eliminate the need for Keystone correction
and provide the best image quality.
The projector lens should be centered in the middle of the screen. If the horizontal line passing through the
lens center is not perpendicular to the screen, the image will be distorted, making viewing diffi cult.
For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling
directly on the screen washes out the colors, making viewing diffi cult. Close the curtains and dim the
lights when setting up the screen in a sunny or bright room.
•
•
Note
Standard Setup (Front Projection)
Place the projector at the required distance from the screen
according to the desired picture size.
Example of standard setup
Side View Top View
H
Screen
Lens center
L
Upper lens shift
position
(Desktop setup)
H1
H2
Screen
Lens center
Lens center
Lower lens shift
position
(High mount setup)
L
[AN-PH808EX]
[AN-PH814EZ/AN-PH818EZ/AN-PH823EZ/AN-PH845EZ]
Screen
Center of screen
W
Lens center
Lens center
Leftmost lens shift
position
Rightmost lens shift
position
The distance from the screen to the projector may vary depending on the size of the screen.
The default setting can be used, when placing the projector in front of the screen. If the
projected image is reversed, readjust the setting to “Front” in the “PRJ Mode” menu. (See
page 49 of the projector's operation manual.)
Place the projector so that an imaginary horizontal line that passes through the center of the
lens is perpendicular to the screen.
•
•
•
■
Loading ...
Loading ...
Loading ...