Loading ...
Loading ...
Loading ...
ENGLISH-10
After completely charging the POWERbot for the rst time (after purchase), it can be used for 60
min. in Nomal ( ) mode. (Refer to the page 41 for the charging time.)
Smart Charging
If POWERbot runs out of charge in Auto clean mode, it will automatically return to the docking
station to be charged and will recommence the cleaning to complete the cleaning area after two-
third of battery charging is done. (Max. 2 times).
Charging
1
Turn on the
emergency switch
on the bottom
You must turn on the
emergency switch to turn on
the POWERbot.
Press and release the
button.
2
Manually charge
the POWERbot by
placing it on the
docking station
Make sure the charging
pins on the POWERbot
and the docking station
are aligned.
3
Check the
charging status
For SR1*M701*** Series,
The battery indicator blinks at 1 sec.
intervals during charging and the indicator
will remain in ON status when fully charged.
For SR1*M702*** / SR1*M703*** /
SR2*M70**** Series,
" " will turn on according to
charging progress and "FULL" will
turn on when charging is complete.
WARNING
• Rated input voltage of
this product is 100-
240V~.
<SR1*M702*** / SR1*M703*** /
SR2*M70**** Series>
<SR1*M701*** Series>
VR7000_EN_DJ68-00763P-07_EU.indd 10 2018-02-21 오후 2:23:42
Loading ...
Loading ...
Loading ...