Loading ...
Loading ...
Loading ...
27
en
Tips on energy saving
Note:
If there is not enough descaling solution in
and press C again.
Remove the suction pipe from milk
container, wipe it and insert the end of the
grounds container.
Close the appliance door.
Place a container with a capacity of 17 oz
Press C.
19 minutes.
Remove the container and press C.
Rinse the water tank and (if removed)
Fill the tank with fresh water up to the
Replace the water tank and close the door.
Place the container underneath the
Press C.
7 minutes and rinse the appliance.
Remove the container, empty the drip
trays, replace and close the appliance door.
Press C. The appliance is descaled,
cleaned and ready for use again.
Press E to exit the program.
Special rinsing
NOTICE:
If any of the service programs are ever
please proceed according to the informa-
tion on the display:
Press C. The program will now run for
Empty the drip trays, replace and close
the appliance door. The appliance is
ready for use again.
Press E to exit the program.
Tips on energy saving
Press I to switch the appliance to
uses very little power when in “energy
relevant functions so as to avoid damage.
In the menu under “Switch off after”,
15 minutes.
and the illumination in the menu to save
energy.
prematurely results in higher energy
more quickly.
Descale the appliance regularly to avoid a
cause higher energy consumption.
Frost protection
To prevent frost damage during trans-
port and storage, completely empty the
Storing accessories
special accessory drawer for storing the
Quick reference guide and the accessories
in the appliance.
Put the measuring spoon and the water
Put the Quick Reference Guide into the
special support at the front of the acces-
sory drawer.
in the holder on the inside of the door
(Figure D).
Loading ...
Loading ...
Loading ...