Loading ...
Loading ...
Loading ...
9
en
Initial use
Setting up the appliance
NOTICE:
Only use the appliance in a frost-free
recessed grip and open.
Replace the water tank and click into
place.
Set the power switch to I and close
the appliance door.
The appliance heats up and is rinsed.
The control panel is activated.
“Language” appears.
select the desired language and press the
[ Water hardness ]
Note:
It is important to set the water hardness
-
rately indicate when the descaling program
is level 4. If a water softener is installed in
the house, please set the water hardness to
level 3. You can also check the water hard-
Use the enclosed test strip to determine
strip in water and check the result after
one minute.
Level Water hardness
gr/gal (US)
1
2
3
4
1.0426 - 7.2985
8.3412 - 14.597
15.64 - 21.896
22.938 - 31.279
set the water hardness determined.
Press [ Set-up complete ]. The settings are
saved.
The appliance is ready to use as soon
as the drink images are shown and the
m lights up.
The integrated fan switches on each time
after a few minutes.
Note:
after running a service program, or if it has
Switch o appliance
Press I.
The appliance rinses and switches to
energy saving mode.
Exception: If only hot water is dispensed,
open the appliance door and set the
power switch to h.
NOTICE:
Do not press the power switch while the
appliance is in use.
Note:
The factory settings of the fully automatic
performance. The appliance switches auto-
matically to the energy saving mode after
Note:
The appliance is equipped with a sensor.
correspondingly shown on the display when
switching to the energy saving mode. If
there is milk in the container, please store in
the fridge.
Loading ...
Loading ...
Loading ...