G5587-5859BLK-PUS User Manual

Loading ...

Before working inside your computer

NOTE: The images in this document may dier from your computer depending on the conguration you ordered.

Before you begin

1 Save and close all open les and exit all open applications.

2 Shut down your computer. Click Start > Power > Shut down.

NOTE: If you are using a dierent operating system, see the documentation of your operating system for shut-down

instructions.

3 Disconnect your computer and all attached devices from their electrical outlets.

4 Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.

5 Remove any media card and optical disc from your computer, if applicable.

Safety instructions

Use the following safety guidelines to protect your computer from potential damage and ensure your personal safety.

WARNING

: Before working inside your computer, read the safety information that shipped with your computer. For more safety

best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.

WARNING: Disconnect all power sources before opening the computer cover or panels. After you nish working inside the

computer, replace all covers, panels, and screws before connecting to the electrical outlet.

CAUTION: To avoid damaging the computer, ensure that the work surface is at and clean.

CAUTION: To avoid damaging the components and cards, handle them by their edges, and avoid touching pins and contacts.

CAUTION: You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team.

Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that shipped

with the product or at www.dell.com/regulatory_compliance.

CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the

metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity,

which could harm internal components.

CAUTION: When you disconnect a cable, pull on its connector or on its pull tab, not on the cable itself. Some cables have

connectors with locking tabs or thumb-screws that you must disengage before disconnecting the cable. When disconnecting

cables, keep them evenly aligned to avoid bending any connector pins. When connecting cables, ensure that the ports and

connectors are correctly oriented and aligned.

CAUTION: Press and eject any installed card from the media-card reader.

Recommended tools

The procedures in this document may require the following tools:

• Phillips screwdriver #1

• Plastic scribe

Before working inside your computer 9

Loading ...

User Manual - Page 9