Loading ...
Loading ...
Loading ...
Replacing the ngerprint-reader board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place the ngerprint-reader board in its slot on the palm-rest assembly, then align the screw holes on the ngerprint-reader board
bracket to the screw holes on the palm-rest assembly.
2 Replace the two screws (M2x2) that secure the ngerprint-reader board to the palm-rest assembly.
Post-requisites
1 Replace the power-button board.
2 Replace the computer base.
3 Replace the rear cover.
4 Replace the battery.
5 Replace the base cover.
36
Replacing the ngerprint-reader board 67
Loading ...
Loading ...
Loading ...