Loading ...
Loading ...
Loading ...
Replacing the power-button board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the power-button board with the screw holes on the palm-rest assembly.
2 Replace the two screws (M2x3) that secure the power-button board to the palm-rest assembly.
3 Adhere the power-button board cable to the palm-rest assembly.
4 Slide the ngerprint-reader board cable into the connector on the ngerprint-reader board and close the latch to secure the cable.
5 Adhere the Mylar securing the ngerprint-reader board cable latches to the power-button board and the nger-print reader board.
Post-requisites
1 Follow the procedure from step 8 to step 23 in Replacing the computer base.
2 Replace the rear cover.
3 Replace the battery.
4 Replace the base cover.
34
Replacing the power-button board 65
Loading ...
Loading ...
Loading ...