Loading ...
Loading ...
Loading ...
Eyelet Stitching
S-38
Eyelets, such as those on belts, can be sewn.
• Using the table below, refer to “Using the utility
stitch tables in the “Sewing” section” in the “Basic
operations” section.
a
Attach monogramming foot “N”.
b
Select stitch
.
c
Adjust either the stitch width or the stitch length to
select the desired eyelet size.
1 7mm
2 6mm
3 5mm
• For details, refer to “Setting the stitch width” and
“Setting the stitch length” in the “Basic operations”
section.
d
Lower the needle into the fabric at the beginning of the
stitching, and then lower the presser foot lever.
e
Start sewing.
→ Once sewing is completed, the machine
automatically sews reinforcement stitches, then
stops.
f
Use the eyelet punch to cut a hole in the center of the
eyelet.
• When using the eyelet punch, place thick paper or
some other protective sheet under the fabric before
punching the hole in the fabric.
Eyelet Stitching
Stitch name Stitch
Model 4
Presser foot
Model 3, 2
Model 1
Stitch number
Eyelet stitch 4-15 91 71 N
1
2
3
Memo
• If thin thread is used, the stitching may be too
open. If this occurs, sew the eyelet twice before
removing the fabric, one on top of the other.
Loading ...
Loading ...
Loading ...