Loading ...
Loading ...
Loading ...
ENGLISH
17
CONNECTING EXTERNAL SOURCES
The exact arrangement you use to connect the PC, VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your LCD
television is dependent on the model and features of each component. Check the owner’s manual of each component for the location of
video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular
assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.
CONNECTING AN ANALOG TELEVISION CABLE OR AN ANALOG ANTENNA WITHOUT A TV CABLE BOX
1. Use one of the following two diagrams if you connect to an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antennas.
2. Connect all power sources before activating the LCD television.
3. Turn on the LCD television.
AB
NOTES: Refer to the owner’s manual of the external equipment to be connected. When connecting external equipment, do not
connect the AC power cords to wall outlets until all other connections are completed.
NOTES: Ensure that the power cord is inserted correctly to avoid connector damage.
For safety, install an external antenna conforming to AS1417.1(applicable for Australia only)
Loading ...
Loading ...
Loading ...