Loading ...
Loading ...
Loading ...
5. Cabinet installation
Heavy Weight Hazard
* Use 2 or more people to move and install wall
oven.
* Failure to follow this instruction can result in
injury or damage to the unit.
The wall oven can tip when the door is open. The
antl-tlp mounting screws supplied with the wall
oven must be installed to prevent tipping of the
wall oven and injury to persons.
_Unpack the wall oven. Remove the bottom trim
taped on the oven side panel.
HFind the 2 anti-tip mounting screws included in
the literature package.
_ Insert the oven into the cabinet opening. Slide
oven inward leaving 11/2'' (3.8 cm) clearance
between the oven and front of cabinet.
_Putt the armored cable through the hole for it in
the cabinet and toward the junction box while
moving the appliance inward.
_Push the oven in and against the cabinet.
install the Anti-tip Mounting Screws
A. The mounting hotes in the side trims may be
used as a temptate to locate the appliance
mounting screw holes (see figure 7).
B. Use the two screws supplied to fix the
appliance to the cabinet.
_ Jnstaff the Bottom Trim
Place the top of the bottom trim over the side
trim tabs on each side of the oven below the
oven door and fix it using the 2 screws supplied
in the mounting holes located on each side trim
below the oven frame (see Figure 7).
Mounting
Decorative
Trim
Mounting
Figure 7
6. Leveling the Wall Oven
1. Instalt an oven rack in the center of the upper
oven (see Figure 8).
2. Place a level on the rack. Take 2 readings with
the level placed diagonally in one direction
and then the other. Use wood shims under the
walt oven to level if necessary.
3. Repeat in the lower oven if you have a double
cavity watt oven. If the level indicates that the
rack is not level, use wood shims to reach a
compromise for both ovens.
Figure 8
6
Loading ...
Loading ...
Loading ...