Loading ...
Loading ...
Loading ...
As a result, child restraint systems cannot
perform their intended protective function.
Rear seat backrests that are not locked can
also cause additional injuries, e.g. in the
event of an accident.
#
Always lock rear seat backrests after
installing Top Tether belts.
#
Observe the lock verification indicator.
If the seat backrest is not engaged and locked,
this will be shown on the multifunction display
on the instrument cluster.
If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by Top
Tether. The Top Tether belt facilitates an
additional connection between the child
restraint system attached with LATCH-
type (ISOFIX) and the vehicle.
#
If necessary, move head restraint 1
upwards (/ page 94).
#
Fold up cover 2 of Top Tether anchorage
3.
#
Install the LATCH-type (ISOFIX) child restraint
system with Top Tether. Always comply with
the child restraint system manufacturer's
installation instructions when doing so.
#
Guide Top Tether belt 4 under head
restraint 1 between the two head restraint
bars.
#
Hook Top Tether hook 5 of Top Tether belt
4 without twisting into Top Tether anchor‐
age 3.
#
Tension Top Tether belt 4. Always comply
with the child restraint system manufactur‐
er's installation instructions when doing so.
#
Fold down cover 2 of Top Tether anchorage
3.
#
If necessary, slide head restraint 1 down‐
wards (/ page 94). Make sure that you
Occupant safety
55
Loading ...
Loading ...
Loading ...