Loading ...
Loading ...
Loading ...
The dishes were not
loaded correctly .
See notes in " Loadin g the Dishwasher Baskets ".
Select a more intens ive programme.
See" Wash Cycle Table ".
Use mo re detergent, or change your d etergent.
Rearrange the items so that the spray can rotate freely.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets. See "Cleaning the Spray
Arms".
Use less detergent if you hav e soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slight ly so that the steam can
escape. Begin unloading the dis hwasher only once t
he dishes are bare ly warm to the touch. Empty the low
basket first . This prevents water form dropping off
dishes in the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performan ce. Choose
a progra m with a long washing time.
Water drainage is m ore difficult with these i tems.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Theprogramme was
notpowerful enough.
Not enough detergent
was d ispensed.
Items are blocking
the path of spray arms.
The filter combination
inthebaseofwash
cabinet is not clean or
is not correctly fitted.
This may cause
the spra y arm jets
to get blocked.
Combin ation of soft
water and too much
detergent.
Aluminum utensils
have rubbed agai nst
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coa ting
Uns a ti s
-fa ct ory
was hin g
res u lt
Uns a ti s
-fa ct ory
dry i ng
res u lt
Overflow .
Whe n some malfunctions come on, the appliance will display error code s to warn you:
Longer inlet time.
F aucets is not opened, or water intake is
restricted,or water pressure is too low.
Some element of dishwasher leaks .
E1
E4
E8
Failure of orientation of distributary valve
Open circuit or break of distributary valve
If overflow o ccur s, turn off the main water supply before calling a se rvice.
If there is water in the base pan because o f an overfill or small leak,
the water should be removed before restarting the dis hwasher.
E3
Not reaching required tempeturate
Malfunction of heating element
Loading ...
Loading ...
Loading ...