Loading ...
Loading ...
Loading ...
Compartment
With each wash cycle.
Compartment
For programmes with pre-wash only.
(Follow the user instructions!)
Mechanical indicator
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a programme
Turn on the water tap and press the Start/Pause Button. The machine w ill start working
after about 10 seconds.
Running the dishwasher
Switch off theappliance
Turn off the water tap,
unload t he baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes)before unloading the dishwasher to avoid handling
the dishesand utensils while they are still hot and more susceptible to break.
They will also dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten d ishes in the
dishwasher.
Scrape of f any large amou nt of leftover food. Soften remnants of burnt food in pa ns,
then load the baskets. Refer to the dishwasher loading instructions.
Clos e the door,press the Programme Button until the selected programme lights up.
( See the section entitled Operation instruction )“”
When the working cycle has finished, the buzzer of the
dishwasher will sound8 times, then stop.
Turn off the appliance using the On/Off Button .
If the appliance is switched
off during a wash cycle.
Open th edoo r carefully.
Hotsteam mayescape
when the do oris opened!
If the appliance is s witched off during a washcycle, w hen switched
on again, please re-select the washing cycle and operate the dishwasher
according to t he original P ower-on state ).
Switch on the appliance Press the On/Off button to switch on the appliance, Open the door.
For d etailed operating method r ead th e corresp onding c on tent on the instruction man ual.
1. A ru nning cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the w ater a lreadydrained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Pause button, press the program button more than 3 seconds,the machine
will be in standby state, then you can change the program to the desired cycle setting
1.P ress t he Start/Pause Button to stop the washing.
2.Open the door a little .
3.After the spray arms stop working, you can open the door
completely.
4.Add forgotten dishes.
5.Close the door
6.P ress the Start/Pause Button, the dishwashe r will run
after 10 seconds.
AA
CC
BB
Loading ...
Loading ...
Loading ...