Loading ...
Loading ...
Loading ...
Operating the appliance en
13
1Operating the appliance
Oper at i ng the appl i anc e
You have already learnt about the controls and how
they work. Now we will explain how to apply settings on
your appliance.
Switching the appliance on and off
Use the function selector to switch the appliance on or
off. Turning the function selector to any position other
than the "Off" position switches on the appliance. To
switch off the appliance, always turn the function
selector to the "Off" position.
Setting the heating function and temperature
It is very easy to apply the settings you require to your
appliance using the function and temperature selector.
To find out which heating function is best for which type
of food, please refer to the beginning of the instruction
manual. ~ "Getting to know your appliance"
on page 8
Example in the picture: CircoTherm hot air ‚ at
160 °C.
1. Use the function selector to set the heating function.
2. Use the temperature selector to set the temperature
or grill setting.
The appliance will start heating after a few seconds.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Note: You can also set a cooking time and end time on
the appliance. ~ "Time-setting options" on page 14
Changing
The heating function and temperature can be changed
at any time using the relevant selector.
Heating-up indicator
The heating-up indicator will remain lit while the
appliance is heating.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
when the heating-up indicator first goes out.
Note: Due to thermal inertia, the actual temperature
inside the cooking compartment may differ slightly from
the temperature that is displayed.
Rapid heating
With Rapid heating, you can shorten the heat-up time.
Only use rapid heating when a temperature of over
100 °C has been selected.
To achieve an even cooking result, do not place your
food into the cooking compartment until rapid heating is
complete.
1. Set the function selector to °.
2. Use the temperature selector to set a temperature of
above 100 °C.
The oven starts to heat up after a few seconds. The /
symbol appears in the display.
3. Wait until a signal sounds and the / symbol goes
out.
The rapid heating has ended.
4. Place the meal in the cooking compartment.
5. Set the type of heating.
&
Loading ...
Loading ...
Loading ...