Loading ...
Loading ...
Loading ...
13D-Link DCS-6314 User Manual
Section 2: Assembly and Installation
Step 1
Position the Alignment Sticker in the desired location making
sure the Camera and Wire-in-Bracket have sucient space.
Use the dimension diagrams in "Dimensions" on page 73 for
additional reference.
Step 2
Use a 6mm drill bit to make required holes approximately
30mm deep.
Step 3
Remove the Alignment Sticker.
Step 4
Insert wall anchors and ax the mounting plate using the
screws provided.
Deploying the Camera
Note: Before deploying the camera to a xed location, it is recommended that you take a photo from the desired location to
ensure an adequate eld-of-view.
Loading ...
Loading ...
Loading ...