Loading ...
Loading ...
Loading ...
REMOVABLEPARTS
BULB
LIVE COLLAR
BULB COVER BAIL WIRE
TO REMOVE:
Open the door to the broil
stop position_ Grasp the
door on each side and lift
up and off the hinges, DO
NOT LIFT THE DOOR
BY THE HANDLE.
TO REMOVE THE COVEn:
t. Disconnect electrical power to the oven at
the main circuit breaker or fuse box,
2. Hold your hand under cover and firm!y
push back the bail wire, until it clears and
releases the bulb cover,
REPHCE ?'HE LIGHT BULE:
Unscrew the fight bulb and replace it with a
40-watt home appliance bulb,
TO R_PLACE COVER:
t. Place the bulb cover into the groove of the
bulb socket,
2. Pull the bail wire forward until it snaps into
the indentation on top of the bulb cover
3. Reconnect the electricat power to the oven.
i ,irl.....................
DO not touch a hot oven light
bulb. Do not touch a bulb with
wet hands or wet cloth.
Never touch the electrically
live collar on the bulb when
removing or replacing the
bulb. Do not remove any
screws,
=,, iii=,, u.... ,=
r- _'
When the door is removed
and the hinge arms are in
the broil stop position, do
not bump into the hinge
arms. They could snap
back and cause injury to
hands and damage the porcelain finish
of the front frame. Cover the hinge arms
with empty paper towel rolls or towels
while working in the oven area.
7"0 REPLACE:
Remove the paper
towel rolls Or towels,
Make sure the hinges
are still in the broil stop
position, Grasp the
door on each side. Lift
the door over each
hinge_ Line the slots at
the bottom of the door
with the hinges Slide
the door down over the
hinges as far as it will
go.
20
Loading ...
Loading ...
Loading ...