Loading ...
Loading ...
Loading ...
9
7. Select SOIL LEVEL
Once you select a cycle, select the soil level by turning the
Soil Level knob to the desired setting.
8. Select WASH TEMP
Select the Wash Temp by turning knob to desired temperature.
All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp Suggested Fabrics
Hot
Some cold water is added
to save energy. This may be
cooler than your hot water
heater setting.
Whites and pastels
Durable garments
Heavy soils
Warm
Some cold water may be
added, so this will be cooler
than what your previous washer
provided.
Bright colors
Moderate to light soils
Cool Lights
Warm water is added to assist
in soil removal and to help
dissolve detergents. Cool is
slightly warmer than cold.
Colors that bleed or fade
Light soils
Cool Darks
Warm water is added to assist
in soil removal and to help
dissolve detergents. Cool is
slightly warmer than cold.
Dark colors that bleed or fade
Light soils
Cold
Warm water may be added
to assist in soil removal and to
help dissolve detergents.
Dark colors that bleed or fade
Light soils
9. Select WATER LEVEL and RINSE options
Select the number of rinses by turning the Rinse knob to the
desired setting.
IMPORTANT: The Rinse knob must be set to an option “with Fabric
Softener” when using the fabric softener dispenser. This ensures
that fabric softener is added at the correct time in the rinse for
even distribution.
Set the Water Level knob to the Auto setting and the washer will
automatically sense the appropriate water level for the load size
and type.
Set the Water Level knob to the Deep Fill setting and the washer
will ll to the maximum water level.
NOTES:
The cycle will be longer due to extended ll times when using
the Deep Fill setting.
Deep Fill is not available in the Normal cycle mode. Selecting
the Normal cycle with the Deep Fill setting will result in auto
sensing of the water level.
10. Press START/PAUSE/Unlock Lid
to begin wash cycle
Press the START/PAUSE/Unlock Lid button to start the wash cycle.
When the cycle has nished, the Complete status light will light.
Promptly remove garments after cycle has completed to avoid
odor, reduce wrinkling, and avoid rusting of metal hooks, zippers,
and snaps.
Unlocking the lid to add garments
If you need to add one or two missed garments after the wash
has started, simply open the lid and this will pause the cycle.
After adding the garments, simply close the lid and the cycle will
resume.
If, instead, you press the START/PAUSE/Unlock Lid button to pause
the cycle and then open the lid to add garments, you will need to
press the START/PAUSE/Unlock Lid button after closing the lid to
resume the cycle.
NOTE: Washer will not ll with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes, the water
will pump out automatically.
Manual soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press START/PAUSE/
Unlock Lid and leave the lid closed. Once your desired soak
time has elapsed, press START/PAUSE/Unlock Lid again to
continue the cycle. As long as the lid remains closed, your
soak time can be longer than 10 minutes. However, if the lid
is opened during the soak and remains open for more than
10 minutes, the water will pump out automatically.
Loading ...
Loading ...
Loading ...