Loading ...
Loading ...
Loading ...
14
If you experience Possible Causes Solution
Dry spots on load
after cycle (cont.)
Washer may be tightly packed. Use Bulky/Bedding or Jeans/Towels cycle for higher water ll, or set
Water Level knob to Deep Fill setting. See “Cycle Guide” to match your
load with the best cycle.
NOTE: Deep Fill is not available in the Normal cycle mode. Selecting the
Normal cycle with the Deep Fill setting will result in auto sensing of the
water level.
Added extra garments to the load after
the sensing/ll phase.
Add only one or two additional garments after washer has started.
Incorrect or wrong wash or
rinse temperatures
Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached to both washer and faucet, and have both
hot and cold water owing to inlet valve.
Check that inlet valve screens are not clogged.
Remove any kinks in hoses.
Energy saving controlled
wash temperatures.
This washer uses cooler wash and rinse water temperatures than
traditional top-load washers. This includes cooler hot and warm washes.
Load not rinsed Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached and have water owing to the inlet valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
Not using HE detergent or using too much
HE detergent.
The suds from too much detergent can keep washer from operating
correctly. Always measure detergent and follow detergent directions
based on load size and soil level.
Washer not loaded as recommended. The washer is less ecient at rinsing when load is tightly packed.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only.
Use cycle designed for the fabrics being washed.
Add only one or two additional garments after washer has started.
Use Bulky/Bedding or Jeans/Towels cycle for higher water ll, or set
Water Level knob to Deep Fill setting. See the “Cycle Guide” chart to
match your load with the best cycle.
NOTE: Deep Fill is not available in the Normal cycle mode. Selecting the
Normal cycle with the Deep Fill setting will result in auto sensing of the
water level.
Sand, pet hair, lint,
etc. on load after
washing
Heavy sand, pet hair, lint, and
detergent or bleach residues may require
additional rinsing.
Add a second rinse to the selected cycle and/or use the Heavy Soil Level
setting or Deep Fill option.
NOTE: Deep Fill is not available in the Normal cycle mode. Selecting the
Normal cycle with the Deep Fill setting will result in auto sensing of the
water level.
Load is tangling Washer not loaded as recommended. See the “Using Your Washer” section.
Select a cycle with a slower wash action and spin speed; however, items
will be wetter than those using a higher speed spin. Use Bulky/Bedding or
Jeans/Towels cycle for higher water ll, or set Water Level knob to Deep
Fill setting. See the “Cycle Guide” chart to match your load with the
best cycle.
NOTE: Deep Fill is not available in the Normal cycle mode. Selecting the
Normal cycle with the Deep Fill setting will result in auto sensing of the
water level.
Load garments in loose heaps evenly around the basket wall.
Reduce tangling by mixing types of load items. Use the recommended
cycle for the type of garments being washed.
Not cleaning or
removing stains
Added more water to washer. Washer senses load size and adds correct amount of water. This is normal
and necessary for clothes to move. It is normal for the wash load to be
not completely covered in water. Extra water, added manually, results in
less-eective cleaning.
Washer not loaded as recommended. Washer is less ecient at cleaning when load is tightly packed.
Load garments in loose heaps evenly around the basket wall. Load with
dry items only.
Add only one or two additional garments after washer has started.
Loading ...
Loading ...
Loading ...