Loading ...
Loading ...
Loading ...
51TROUBLESHOOTING
ENGLISH
Operation
Problem Possible Cause Solutions
Water leaking
Inlet hose connection is loose
at faucet or washer.
Check hoses for leaks, cracks and splits.
Check and tighten hose connections.
House drain pipes are clogged.
The washer pumps out water very rapidly. Check for
water backing up out of the drain pipe during drain. If
water is seen coming out of the drain, check for proper
drain hose installation and check for restrictions in the
drain. Contact a plumber to repair drain pipe.
Drain hose has come out of
drain or is not inserted far
enough.
Tie drain hose to inlet hose or standpipe to prevent it
from coming out during drain. For smaller drain pipes,
insert the drain hose into the pipe as far as the drain
hose ange. For larger drain pipes, insert the drain hose
into the pipe 1-2 inches past the ange.
A large item such as a pillow
or blanket is above the top of
the tub.
Use the Bulky cycle for large or bulky items. Use extra
care and never wash more than half a load of items that
oat, such as pillows.
Stop the washer and check the load. Make sure the load
does not crest above the top edge of the tub.
Water leaks every
load
Hoses not installed correctly. Normal Operation
Washer will not
drain water
Kinked drain hose. Ensure that the drain hose is not kinked.
Drain located unproperly.
Make sure that the drain hose is no more than 5 ft. away
from the washer.
Washer will not turn
on
Power cord is not properly
plugged in.
Make sure that the plug is plugged securely into a
grounded, 3-prong, 120 VAC, 60 Hz outlet.
House fuse is blown, circuit
breaker has tripped, or power
outage has occurred.
Reset circuit breaker or replace fuse. Do not increase
fuse capacity. If the problem is a circuit overload, have it
corrected by a qualied electrician.
Wash cycle time is
longer than usual
The washer automatically
adjusts the wash time for
the amount of laundry, water
pressure and other operating
conditions.
This is normal. The washer adjusts cycle time
automatically to provide optimal results for the selected
cycle. The time remaining shown in the display is only an
estimate. Actual time may vary.
Loading ...
Loading ...
Loading ...