User Manual Etekcity EB9380H Digital Body Weight Bathroom Scale

Etekcity EB9380H Digital Body Weight Bathroom Scale - Use Manual - Use Guide PDF.
Documents: Go to download!
  • Owner's manual - (English)



USER MANUAL Digital Body Weight Scale

Main Functions

1. Scale platform

2. Digital display

3. Unit selection

4. Battery compartment

5. Anti-skid padding

Set-Up

Open the battery compartment cover located on the back of the scale. Remove the two 1.5V AAA batteries from their plastic film and apply the batteries under the correct polarity. Reseal the battery compartment in order to activate the scale.

Operation

Weight Measurement

1. For best results, place the scale on a hard, flat surfaces. Avoid carpet or soft surfaces.

2. Gently step on the scale. The scale will automatically activate.

3. Remain standing evenly on the scale, without moving or shifting your feet or body. The scale will then display and flash your final results.

Converting Weight Units

  1. Apply pressure onto the weighing platform to activate the scale.
  2. Press the unit conversion button on the back of the scale to convert units from pounds (lb) to kilograms (kg).
  3. Place the scale back onto a hard, flat surface when you are ready to measure.

NOTE: For accuracy, the digital scale may trigger automatic calibration when physically lifted and moved or when the unit of measurement is changed. Should a ‘C’ appear on the digital display at any time, recalibrate the scale as noted in the Recalibrating the Scale section.

Maintenance

Battery Replacement

  1. Open the battery compartment on the back of the scale.
  2. Remove the old batteries and dispose of them properly.
  3. Install two new 1.5V AAA batteries, making sure they are placed under the correct polarity.
  4. Replace the battery compartment cover.

NOTE: The scale may need to be recalibrated after replacing the batteries.

Recalibrating the Scale

If the scale has been moved or flipped upside down, it must be recalibrated to ensure accurate results

  1. Place the scale on a hard, flat surface.
  2. Step on the scale with one foot until the display lights up, then step off.
  3. The scale will show “0.0,” indicating that the calibration was successful.

Specifications

Troubleshooting

Error MessageReasonSolution
“Err”Maximum weight capacity has been exceeded.Step off the scale to avoid damage.
Item being weighed is too light.Remove item and use a smaller scale to measure object.
“Lo”Low battery.Replace the batteries as noted in the Battery Replacement section.
“C”Scale needs to be calibrated.Recalibrate the scale.
Scale is not turning on.Batteries may be incorrectly installed.Take out batteries and reinstall them under the correct polarity.
Batteries may need to be replaced.Replace batteries.
Light does not come on when stepping on scale.Scale may be broken. Contact customer support

Safety Information

IMPORTANT: Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself.

  • The glass platform is slippery when wet. Make sure the platform is dry before stepping on for measurement.
  • Consult your primary-care doctor or physician before making changes to your diet, exercise plans, and/or physical activities.
  • This scale is not intended for commercial use.
  • To weigh safely and accurately, please stand on the center of the platform and stand still until a result is calculated
  • DO NOT strike or drop the scale.
  • DO NOT stand on the edge of the scale or jump on it.
  • DO NOT stand on the scale platform for a prolonged period of time or when not in weighing operation. • Always place the scale on a hard, dry, and flat surface before measurement.
  • Handle the scale with care, as it is a precision instrument.
  • Clean the scale with a damp cloth and avoid getting water or any other liquid inside the scale.
  • DO NOT use chemical or abrasive cleaning agents to clean the scale.
  • Keep the scale in a cool environment with dry air.
  • Always keep the scale in a horizontal position; do not store vertically.
  • If the scale fails to turn on, check whether the batteries are installed correctly. Replace the batteries if necessary.
  • If an error appears on the display or if the scale does not turn off automatically, remove the batteries for 3 seconds, then reinstall them.
  • DO NOT overload the scale (max. weight capacity: 400 lb / 180 kg).
  • If the scale is not in use for an extended period of time, remove the batteries to ensure battery conservation and to extend the scale service lifetime.


See other models: EK6314 EK7090 ESF24 EB4074C ESN00

Etekcity EB9380H | File type: PDF | Filename: Elegant Black EB9380H.pdf | Size: 97.98 KB | Language: English

Download User Manual

Product Infomation and Reviews - EB9380H photo

EB9380H Photo

T: @manualsFile

https://manualsFile.com