Loading ...
Loading ...
Loading ...
The dishes were not
loaded correctly .
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive prog ramme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearr ange the items so that the sp ay can rotate freely.r
Clean and/or fi t the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you have soft water and select
a shorter cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-a id/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the d ishwasher only once
the dishes are barely warm to the touch. Empty the low
basket first. This prevents water for m dropping off
dishes in the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is more d ifficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
notpowerful enough.
Not enough dete r gent
was d ispensed.
Items are blocking
the path of sp ay arms.r
The filter combination
inthebaseofwash
cabinet is not clean or
is not correct ly fitted.
This may cause
the sp ay arm jets
to get blocked.
r
Combin ation of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse -aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
Overflow .
Whe n so me malfunctions come on, the appliance will displ ay error code s to warn you:
Longer inlet time.
F aucets is not opened, or water intake is
restri cted,or water pressure is too low.
Some element of dishwasher leaks .
E1
E4
If overflow occurs, turn off the main water supply before ca lling service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher .
Loading ...
Loading ...