Loading ...
Witheachwashcycle.
Compartment
For pro grammes with pre-wash only.
(Follow the !)User Manual
Electric indic ator on control panel (if pro vided).
Check the rinse aid level
Load the baskets
Select a programme
Turn on the water tap and press the . The machine will start working
after about 10 seconds.
Start/Pause Button
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 min utes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susce ptible to break.
They will alsodry better.Unload the appliance, starting fro m the lower b asket.
Changing t heprogramme
Add forgotten dishes in the
dishwasher.
Scrape off anylarge amount of leftover food. Soften remnants of burnt food in pans,
then l oad the baskets. Refer to the dishwashe r loadin g inst ructions.
Close the door,press the Programme Button until the selected programme lights up.
( See the section entitled Operation instruction )“”
When the working cy cle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the Power Button.
If the appliance is switched
off during a wash cycle.
Op en t he do or car ef ull y.
Hots team m ay esc ape
when thedoorisopened!
If the appliance is switched off during a wash cycle, when switched
on agai n, plea se re-select the washing cycle and operate the dishwasher
according to the original Power-on state.
Switch on the appliance Press the Power bu tton to switch on the appliance, Open the door.
For detailed operating method read the co rresponding contentonthe instructionman ual.
1. A running cycle can o nly be modified ifit has been running for a short time. O therwise the deterg ent
m ay have already be en released and the water already drained. If this is the case, the detergent
dispenser must be refil led.
2.
Press the St art/Pause button, press the program button for more than three seconds,t he
machine will be in standby state, then you can change the program to the desired cycle setting
1.Press the Sta rt/Paus e But ton to stop the washing.
2.Open the door a little .
3.After the spra y arms stop working, you c an open the door
c ompletely.
4.Add forgotten dishes.
5.Close the door.
6.Press the St a rt/Pau s e Button, the dishwa s her will r un
after 10 seconds.
Loading ...
Loading ...
Loading ...