Loading ...
Loading ...
Loading ...
LOADING, STORAGE AND PASSENGER COMPARTMENT
571
Installation
CAUTION
The steel cargo grid may only be used in the
rear position (behind the rear seat) described
here.
Before installing the steel grid, the existing plas-
tic ceiling mounting consoles must be replaced
with steel consoles. Volvo recommends that the
ceiling consoles are only replaced by an author-
ized Volvo workshop or retailer.
1. Fold down the rear seat backrests.
2. Make sure that the steel grid is facing the
right direction. Lift the grid into the vehicle
through one of the rear doors.
3.
Position the grid's attachment points in the
ceiling consoles.
The next step will be easier if two people
hold the steel grid in the right position.
4.
Screw the provided screw into place using
the provided 6 mm Allen wrench. Repeat on
the other side. Recommended torque: 20 Nm
(15 ft-lb).
> Check to make sure the steel grid is
securely in place.
5. Return the backrest to the upright position.
For more information on necessary tools and pro-
cedures for installing/removing, see the assem-
bly instructions provided with the steel grid.
CAUTION
The steel cargo grid cannot be folded up or
down when a cargo compartment cover is
mounted.
Related information
•
Loading recommendations (p. 565)
•
Load anchoring eyelets (p. 568)
Loading ...
Loading ...
Loading ...