Loading ...
Loading ...
Loading ...
||
LOADING, STORAGE AND PASSENGER COMPARTMENT
* Option/accessory.
570
Loading mode
From the fully opened position:
–
Press the handle section of the cargo com-
partment slightly upward.
> The cover will move up until it stops in the
partially retracted position.
Returning to the fully open position from the par-
tially retracted position:
1. Grasp the handle and pull the cover down as
far as possible. Angle the handle slightly
upward so that the attaching pins can more
easily move past the first set of grooves.
2. Release the handle so that the attaching
pins engage into the grooves.
> The cover will be secured in the fully open
position.
CAUTION
When in the loading position, the cargo com-
partment cover can obstruct visibility to the
rear. Make sure that the cargo compartment
cover is fully extended or fully retracted during
driving.
Retracting the cover
1. From the fully opened position:
Lift the cover's handle and pull it rearward to
release the cover's attaching pins from the
grooves. Let the cover retract.
From the partially retracted position:
Grasp the handle and pull the cover out of
the groves to the fully open position. Lift the
handle and pull it rearward to release the
cover's attaching pins from the grooves. Let
the cover retract.
2. Let the cover retract with its attaching pins
above the side panels until it stops in the
fully retracted position.
Related information
•
Installing and removing the cargo compart-
ment cover* (p. 568)
Installing and removing the steel
cargo grid*
The steel cargo grid helps prevent loads or pets
in the cargo compartment from being thrown for-
ward into the passenger compartment.
For safety reasons, the steel grid must always be
installed and secured correctly.
WARNING
Under no circumstances may a person be in
the cargo compartment when the vehicle is
moving. Heavy braking or a collision could
lead to serious injury.
Loading ...
Loading ...
Loading ...