Loading ...
Loading ...
Loading ...
Installation Instructions
ELECTRICAL CONNECTIONS (CONT.)
3
B. Usage Situations where Appliance Power Cord
will be Disconnected Frequently.
Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual failure of the adapter
ground terminal. The customer should have the two-
prong wall receptacle replaced with a three-prong
(grounding) receptacle by a qualified electrician
before using the appliance.
The installation of appliances designed for mobile home
installation must conform with the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD, Part 280) or,
when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-Ups),
ANSI A225.1, latest edition, or with local codes. In Canada,
mobile home installation must be in accordance with
the current CAN/CSA Z240/MH Mobile Home
Installation Code.
Electric Disconnect
■ Locate disconnect plug on the range back.
■ Pinch sides of connector and pull out of range back.
SEAL THE OPENINGS
4
Seal any openings in the wall behind the range and in the
floor under the range when hookups are completed.
ASSEMBLE SURFACE BURNERS
Assemble the burners as shown.
The top sides of the Right Front, Right Rear and Left
Front burner heads are marked with the letters “RF”, “RR”
and “LF”, respectively, to aid assembly.
5
47
Grate
Burner head
Burner cap
Electrode
Burner base
CAUTION: Do not operate the burner
without all burner parts in place.
Medium head
(not marked)
and cap
Front of
range
Large
head and
cap
Small head
and cap
Extra large
head and
cap
LF
RR
RF
Loading ...
Loading ...
Loading ...