Loading ...
Loading ...
Loading ...
156
Connecting the Camera to a Computer Via the USB Cable
IMPORTANT
You must install the software and USB driver bundled on the
Canon Digital Camera Solution Disk before connecting the
camera to the computer. Please refer to the Software Starter
Guide for installation instructions, image download instructions
and system requirements.
1
Connect the supplied USB interface cable to the computer’s
USB port and the camera’s terminal.
• You do not need to turn off the computer or camera when making this
connection.
• Please refer to your computer manual for information regarding the location
of the USB port.
• The LCD monitor will blank out when the connection to the computer is
complete and the power/mode indicator will light yellow.
terminal
1.Open the terminal cover
with your fingernail.
2.Insert the connector until
it clicks.
To disconnect the cable from the camera:
Hold the cable connector firmly at both
sides and pull it straight out.
USB port
USB cable
2. USB cable
1. Terminal cover
Loading ...
Loading ...
Loading ...