Loading ...
Loading ...
Loading ...
20
4. Preparing the measurement
Inserting the batteries
•
Open the battery compartment lid.
•
Insert four 1.5V AA (alkaline type LR6) batteries. Make
sure that the batteries are inserted the correct way round.
Do not use rechargeable batteries.
•
Close the battery compartment lid again carefully.
•
All display elements are briefly displayed, 24 h flashes
in the display. Now set the date and time as described
below.
If the low battery indicator
is permanently displayed,
you can no longer perform any measurements and must re-
place the batteries. Once the batteries have been removed
from the device, the time must be set again.
•
The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
•
The codes below are printed on batteries containing
harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Setting the hour format, date and time
It is essential to set the date and time.
Otherwise, you will not be able to save
your measured values correctly with a
date and time and access them again
later.
To set the date and time, proceed as
follows:
•
Insert the batteries, or
press and
hold the setting button
SET
for at
least 5 seconds if the batteries have
already been inserted.
•
Select 12h or 24h mode using the function buttons -/+.
Press
SET
to confirm. The year display will start to flash.
Set the year with the function buttons -/+ and confirm with
SET.
•
Set the month, day, hour and minute and confirm each
with the
setting button
SET.
•
The blood pressure monitor switches itself off automatically.
Setting the alarm
You can set 2 different alarm times to remind yourself to
take the measurement. To set the alarm, proceed as follows:
•
Press and hold the function buttons - and + simultaneously
for 5 seconds.
•
Alarm 1 is shown in the display, “on” or “off” flashes
at the same time. With the function buttons -/+, choose
Loading ...
Loading ...
Loading ...