Loading ...
Loading ...
Loading ...
32
EN
SMS
4. If you select Send, the message will be sent immediately. SMS Sent! will be displayed if the message has
been sent successfully.
Edit a Draft message
1. While viewing the message content, press m to display the Draft Box menu options.
2. Scroll
: to Edit and press OK to start editing.
3. After editing, press
OK to confirm the message.
4. Refer to steps 5 to 7 in "Write and send new SMS" on page 28 to send the message or select Save as
Draft to overwrite the original message in the Draft Box.
Delete a Draft message
1. While viewing the message content, press m to display the Draft Box menu options.
2. Scroll
: to Delete and press OK to confirm deletion.
Delete all Draft messages
1. While viewing the message content, press m to display the Draft Box menu options.
2. Scroll
: to Delete All and press OK.
3. Press
OK again to confirm deletion.
SMS settings
This menu allows you to set up the server for sending and receiving SMS messages. Your SE435 can receive
messages from 3 service centers.
Each service center consists of 2 numbers:
- Incoming number
- Outgoing number
The maximum length of an incoming/outgoing number is 24 digits.
The incoming and outgoing numbers of your SE435 are already set to work on your country network. We
advise you not to modify these settings. For more details or in case of any problems, please contact your local
network provider.
SMS reception
Your SE435 can receive SMS messages from another phone if you have subscribed to CLI and SMS services
from your network provider. By default, SMS reception is set to On so that you can receive SMS messages.
To activate or deactivate the reception of SMS messages
1. Press m, press OK to select SMS, scroll : to SMS Settings and press OK, press OK to select SMS
Reception.
2. Scroll
: to On or Off and press OK to confirm.
Even if SMS reception is Off, you can still send SMS.
Loading ...
Loading ...
Loading ...