OSMO MOBILE User Manual

Loading ...

Osmo Mobile User Manual

Charging/Upgrade Port

Trigger

Zoom Control

Blinking Pattern Descriptions

—

Solid Green

The Osmo Mobile is functioning normally or rmware

upgrade successful.

Blinks Green The Osmo Mobile is initializing / Exiting sleep mode

Slow Pulsing Green Standby

—

Solid Yellow The trigger is being held down and the gimbal is in Lock Mode

Blinks Yellow The gimbal is not functioning normally.

Slow Pulsing Green/

Yellow/Red

Charging

Blinks Red Slowly Low battery level warning

Blinks Red Quickly Critical low battery level warning

—

Solid Red Non-DJI battery detected or rmware upgrade failed.

Tap twice on the trigger to re-center your phone. If the system status LED blinks

yellow, it indicates an error in the gimbal.

[7] Trigger

Hold down the Trigger to enable Lock Mode. The gimbal will stay in its current position

regardless of handle movement. The Osmo Mobile will return to SmoothTrack Mode once

the Trigger is released.

Quickly tap the Trigger twice to center the mobile phone.

Tap three times on the trigger to switch between your phone's front and rear camera.

Switching cameras during video recording will stop the recording.

Hold down the trigger and push the joystick up and down to zoom. This function is

available in the DJI GO app metering mode and when using your phone's rear camera

only.

[8] Charging/Upgrade Port

To charge the Osmo Mobile by connecting to this port.

Loading ...

Dji OSMO MOBILE Camera