Loading ...
Loading ...
Loading ...
12 English
Range Hood Use and Care
Range Hood Use and Care
Range Hood Description
1
2
3
4
1. LED lamps
2. Filter handle
3. Filter
4. Control
Range Hood Controls
A B C D E
A. Light Power
B. Blower Off button
C. Low Speed
D. Medium Speed
E. Maximum Speed
Operating the light
1. The Light On/Off button (A) controls both lights. Press once for ON
and again for OFF.
Operating the blower
1. To turn the blower On press speed 1 button (C), control the blower
speed and sound level with 2 (D) and 3 (E) buttons.
Press the blower Off button to turn the blower off.
Cleaning
Exterior surfaces:
To avoid damage to the exterior surface, do not use steel wool or soap-
lled scouring pads. Do not use chlorine based cleaners. Rub in the
direction of the grain line to avoid scratching the surface.
• For a thorough cleaning, use Stainless Steel Cleaner and Polish.
• For everyday cleaning, use a mild liquid detergent and water. Dry
thoroughly.
• For a quick cleaning, wipe with a damp soft cloth or nonabrasive
sponge, then rinse with clean water and wipe dry.
NOTE
Always wipe dry to avoid water marks.
Metal or Charcoal Grease Filter
1. Pull the lter latch toward the back of the range hood and using a
Torx T10 adapter, remove the screw from the lter retainer.
2. For vented installations: Wash the metal lter as needed in a dish-
washer or hot detergent solution.
3. For non-vented (recirculating) installations: Replace the metal l-
ter with a charcoal lter. The charcoal lter is not washable. It should
last up to 6 months with normal use. Dispose of old charcoal lter.
To replace the lter
1. Place the back edge of the lter into the chanel at the rear of the
hood.
2. Pull the lter latch toward the back of the range hood and push the
front of the lter up into place.
3. Replace the screw and release the lter latch.
Replacing the LED Lamp
LED lights are replaceable by a service technician only.
See the contact information in the Warranty section.
Loading ...
Loading ...
Loading ...