Loading ...
Loading ...
Loading ...
Self-heating Function Operation
ConditionProtection
Slow Flashing Green Standby
Fast Flashing Green Normal Discharging
Solid Green Normal Charging / Fully Charged
Solid Yellow Charge Over-current Warning / Discharge Over-current Warning
Flashing Yellow Battery Under-voltage Warning / Battery Cell Under-voltage Warning
Solid Red
Charge Over-current Protection / Discharge Over-current Protection /
Battery High Temperature Protection /
Battery Low Temperature Protection / Short Circuit Protection
Flashing Red
Battery Under-voltage Protection /
Battery Cell Under-voltage Protection /Battery Over-voltage Protection
The self-heating function MUST be disabled or enabled uniformly on all the batteries in the
parallel battery bank.
The warning status will not affect the normal use of the battery. But it is recommended to
pay closer attention to the battery to prevent it from entering the protection mode.
The normal operation of the self-heating function requires a stable charge current greater than
3A for each battery in the parallel battery bank. The self-heating function will start operating
automatically once the battery and the battery temperature drops below 41°F(5°C) and stop
operating automatically once the battery temperature rises above 50°F (10°C).
* Red-Red-Red-Yellow-Yellow-Yellow-Green-Green-Green
** Red-Yellow-Green-Red-Yellow-Green-Red-Yellow-Green
The battery leaves the factory with the self-heating function enabled. To disable the self-heating
function, please switch the battery to shelf mode and long press the Power Button for 8
seconds. The LED indicator will flash red, yellow, and green 3 times respectively* to indicate
that the self-heating function has been disabled. To re-enable the self-heating function, please
repeat the previous steps. The LED indicator will flash red, yellow, and green in sequence for 3
times**
to indicate that the self-heating function has been re-enabled. The battery will switch to
active mode automatically after disabling or re-enabling the self-heating function. When the
self-heating function is disabled, the LED indicator will flash red, yellow, and green 3 times
respectively* every time the battery is switched to active mode.
Loading ...
Loading ...
Loading ...