Loading ...
Loading ...
Loading ...
Power Button Operation
Identifying Battery Operation Status
Battery Operation
DO NOT over-charge or over-discharge the battery.
DO NOT discharge the battery at high temperatures above 140°F (60°C).
Please leave the battery in shelf mode during installation. DO NOT switch the battery to
active mode until making sure that all the connections are correct and secure. Connecting
active batteries to the system may trigger the short circuit protection of the battery.
The LED Indicator indicates the battery operation status. Please refer to the following table
for more details.
The battery leaves the factory in shelf mode. Please switch the battery to active mode by
charging it or using the Power Button after connecting the battery to the system for the first time.
Paralleled batteries can be switched to active mode simultaneously by charging them or
using the Power Button on any battery. To switch paralleled batteries to shelf mode simulta-
neously, please enable the communication between paralleled batteries and use the Power
Button on the first battery. Otherwise, please disconnect paralleled batteries and use the
Power Button to switch each battery to shelf mode.
The battery can be switched between active mode and shelf mode with the Power Button.
When the battery is in shelf mode, long press the Power Button for 1 second to switch the
battery to active mode. The LED Indicator will illuminate after 1~2 seconds of software
initialization to indicate that the battery has been successfully switched to active mode. Please
check the battery voltage to validate an active battery.
Prior to long periods of storage, disconnect the battery from the system and long
press the Power Button for 3 seconds to switch the battery to shelf mode. The LED Indicator
will go out to indicate that the battery has been switched to shelf mode. In shelf mode, the
battery has a low self-discharge rate and can hold the charge for a longer period of time.
Loading ...
Loading ...
Loading ...