Loading ...
Loading ...
Loading ...
MediaSuite 40-55HFL5573D/10 Page 44
TV to USB
1. select [Smart Clone] and press
OK.
2. select [TV to USB] and press OK.
3. Clone data will be loaded from TV
into USB device.
4. wait until the OSD message returns
to its earlier state before removing
the USB device
Welcome Logo / Hotel
Information
Welcome Logo and Hotel Information
images can be stored in the TV using USB
cloning an RF Download.
Put the images in the following USB
locations and perform a USB to TV action.
Welcome Logo:
<USB:\>Q555H\WelcomeLogo
\WelcomeLogo.jpg
File format: JPG, 960h x 540v pixels
Hotel Information:
<USB:\>Q555H\Wallpaper\HotelInfo.jpg
File format: JPG, scaled 16:9 format
(ie. 960h x 540v, 1280h x 720v, ....)
RF Download
Instead of using a USB memory device to
do cloning and firmware update, this
upgrading is also possible using the RF
infrastructure. This is supported by
SmartInstall (Philips Hospitality RF
Download mechanism) and allows a
simultaneous upgrade of televisions.
PBS Mode must be set to ON!
[SW Types]
Defining the software parts to be
upgraded:
[SSB Firmware] TV Firmware
[SSB NVM] TV settings
[StandBy Firmware] Firmware for the
StandBy CPU
[Welcome Logo] Graphic file
[Hotel Information] Graphic file
[All] All of above
(except standby
software)
Loading ...
Loading ...
Loading ...