Loading ...
Loading ...
Loading ...
Maintenance
Maintenance
English58
Upper washer
Tub Clean
Tub Clean is a self-cleaning cycle that removes dirt and bacteria that may occur inside the
tub. We recommend running Tub Clean every 20 washes.
1. Make sure the tub is empty.
2. Press POWER.
3. Press Tub Clean.
4. Press and hold START/PAUSE.
CAUTION
• With Tub Clean, you can clean the tub without using detergent.
• Only use Tub Clean when the tub is empty. This may cause damage to the laundry or a
problem with the washer.
Tub Clean reminder ( )
• The Tub Clean reminder ( ) appears on the main display once every 20 washes. We
strongly recommend that you perform the Tub Clean regularly. Remove the laundry
from the washer, turn the washer on, and clean the tub by running Tub Clean.
• If you do not run Tub Clean, the Tub Clean indicator turns off. However, the indicator
will light again after ve washes. Not running Tub Clean at this point will not cause a
problem with the washer. However, we strongly recommend running Tub Clean at this
point.
• Although the Tub Clean indicator turns on once a month or so, the frequency may differ
depending on the number of times the washer is used.
Fabric softener
By design, the fabric softener compartment on the upper washer is not removable to
facilitate visual feedback to users. To clean the softener compartment, follow these
instructions:
1. Open the top door, and then remove
the softener cap.
FlexWash_DC68-03768L-00_EN.indd 58 2017-09-13 2:26:18
Loading ...
Loading ...
Loading ...