Loading ...
Loading ...
Loading ...
Operations
English40
Operations
Your dual loading washer features upper and the lower washers for your convenience.
The upper washer is an automatic tub loader that is designed to wash relatively small
loads with cold water only while the lower washer is a drum loader that takes care of
normal or relatively heavy loads. The main panel is divided into 2 independent control
panels.
WARNING
To reduce the risk of re, electric shock, or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this washer.
NOTE
Upper washer is for lightly soiled loads only. Upper washer utilises cold water only as part
of washing cycles. For a normally soiled load, please use the Lower washer and refer to
the program schedule for a normally soiled load.
Upper washer
Control panel
01
03
04
05 06 07 08
02
01 Cycle bar Press to select a cycle.
02 POWER Press to turn the upper washer on or off.
03 START/PAUSE
(Hold to Start)
Press and hold to start operation or press to stop operation
temporarily.
04 Status bar
The status bar shows current cycle information and estimated time
remaining, or an information code if the upper washer needs to be
checked.
05 Sound
Mute or unmute the sound.
• The Sound function is available in any cycle while it is running.
06 Rinse Times
Use to add an additional rinse at the end of the cycle to remove
laundry additives more thoroughly.
07 Tub Clean
Use to clean dirt and bacteria from the tub. Regular use (after
every 20 washes) is recommended. No detergent or bleach is
needed. Make sure the tub is empty.
FlexWash_DC68-03768L-00_EN.indd 40 2017-09-13 2:26:15
Loading ...
Loading ...
Loading ...