Loading ...
Loading ...
Loading ...
15
INSTALLATION INSTRUCTIONS: TELESCOPIC DUCT COVERS
Step 8.3 Installing Telescopic Duct Cover Option 1
1. Attach mounting bracket to wall 1/8” from ceiling and centered
with hood.
2. Attach lower portion of duct cover to hood with hardware
provided.
3. Slide upper portion into lower portion of duct cover.
4. Anchor and level hood assembly to wall at desired mounting
height.
5. Install liner into shell following instructions in Step 6 on page 12.
6. Slide starter collar into ducting on top or rear of hood and seal
according to building code regulations.
7. Slide upper portion of duct into mounting bracket and click into
place.
(Duct cover should sit flush to ceiling, but gap could occur if wall and ceiling
are not square)
Optional: Install screw through side of upper portion into mounting bracket on
both sides. Hole to be provided by others. **For painted units damage could
occur to painted surface from drilling**
Step 8-4. Installing Telescopic Duct Cover Option 2
1. Attach mounting bracket to wall 1/8” from ceiling and centered
with hood.
2. Attach lower portion of duct cover to hood with hardware
provided.
3. Slide upper portion onto bracket and click into place.
(Duct cover should sit flush to ceiling, but gap could occur if wall and ceiling
are not square)
4. Slide hood shell and attached lower portion over upper portion
and anchor to wall.
Optional: Install screw through side of upper portion into mounting bracket on
both sides. Hole to be provided by others. **For painted units damage could
occur to painted surface from drilling**
Upper Duct
Lower Duct
Mounting Bracket
Mounting Bracket
Lower Duct
Upper Duct
Optional
Mounting
Hole Location
Optional
Mounting
Hole Location
Loading ...
Loading ...
Loading ...